Dvd Setup - Xoro HTC 2242HD User Manual

Press the SET button to enter the player's setup menu. Setup menu is a facility for
the owner to adjust the detail setting of the player. For the detail of Setup menu see
"SET UP MENU" of this instruction manual. Various features of the player can be
adjusted in the SETUP menu.
1. Press DVD SET button and SETUP menu appears.
2. Press the UP/DOWN button to highlight the desired menu.
Press OK or ► to enter the sub menu and make the selection.
3.
Press ◄ to close the sub menu and save the selection.
4.
The General Menu includes the options for "TV Display", "OSD Language", "Screen Saver"
and "Last Memory".
General Setup
OSD Language
Here you can select the default OSD language for
the DVD part.
TV Display
1. 4 : 3 Pan Scan: It is suit to the common size
TV. When playing, the picture will be cut .
so that the TV screen is filled with the
picture.
2. 4 : 3 Letter box: when the player connect to
the commonly size TV, please select the
type. The top and bottom of TV screen will display black
frame.
3. 16 : 9 Wide Screen: When the player connects to the wide
screen TV.
4. Wide Squeeze: The best choice if you want to display the
correct aspect ratio by 16:9 or 4:3 content.
Screen Saver
This function is used to turn the screen saver On or Off.
On: In STOP, PAUSE or No DISC mode, if no actions are performed about 3 minutes, the Screen
Saver will be activated.
Off: Screen Saver is disabled.
Last Memory
If "Last Memory" is enabled, the DVD-Players stores the playback position when you use the STOP
button to stop DVD Playback. The Player resumes playback from the stored position when you start
playback again. (This function may not be available on all DVD).
ENG54
DVD Player Setup