Set The Backwash Knob - Aquathin MEGACHAR BFF-1 Getting Started

automatically.
The Day Wheel allows for setting a program cycle over a
12-day period, which then repeats automatically for every
subsequent period.
For instance to set the
unit to backwash once
every 6 days, slide the
pins on day "6" and
day "12" outwards.
The Day Wheel can
be rotated such that
the red arrow indi-
cates the current day
of the cycle. See
ure 22.
4. Setting the Backwash Knob
Manually advance
"regeneration" position and allow the control to return
to the "in service" position automatically (approximately
90 minutes). Do not use household water until cycles are
completed. This will allow the resin tank to purge all air.
18 © 2007-2009 Aquathin Corporation. All rights reserved. Rev 20091029
b. Rotate DAY
WHEEL
Fig. 20. (a) slide pins for day 6 and
12 outwards (ensure the others are
fig-
retracted)
(b) the pin (or tab) at the red
pointer indicates "today".
the control
a. Slide pins outward
knob to the