Section 4 − Specifications; Serial Number And Rating Label Location; Unit Specifications; Wire Type, Size, And Feed Speed Capability Table - Miller Electric SuitCase X-TREME 12VS Owner's Manual
The serial number and rating information for this product is located inside the door. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.
4-2. Unit Specifications
Welding
Type of
Power
Input
Source
Power
Type
Constant
Voltage (CV)
Open-Circuit/
Arc Voltage,
Or Constant
14 − 110
Current (CC)
DC Power
Volts DC
Source Only
*See Section 4-3 for detailed wire type, size, and rated speed range
4-3. Wire Type, Size, and Feed Speed Capability Table
Motor Speed
Standard
*Rated speed range per IEC 60974-5
4-4. Gun Recommendation Table
Process
GMAW − Hard or Cored Wires
FCAW − Self-Shielding Wires
4-5. Environmental Specifications
A. IP Rating
This equipment is designed for outdoor use. It may be stored, but is not intended to be used
SECTION 4 − SPECIFICATIONS
Wire
Wire Feed
Diameter
Speed
*
Range
Solid Wire:
.023 - .052 in.
25 − 800 ipm
(0.6 To 1.3 mm)
(0.64 − 20.3
Flux Cored:
mpm) Depending
.030 - 5/64 in.
On Arc Voltage
(0.8 To 2 mm)
Wire Type
All
for welding outside during precipitation unless sheltered.