Check - MOTO GUZZI Griso V1100 Workshop Manual

Griso V1100
8.1.2

CHECK

• Check that the cardan joint is in good condition, that
the gear teeth engaging in the union grooves and the
joint grooves are not damaged or worn. If so, change
the joint.
•
Check that the rubber bellow is not cut or pierced.
Change if necessary.
•
Check that the threadings of the swingarm shafts and
nuts are in good condition, are not damaged or flat. If
so, change them.
•
Check that the union grooves are in good condition,
and in no way damaged or worn. If so, change them.
•
Check that the union outer teeth and inner grooves are
not damaged.
TRANSMISSION
8 - 7