Table of Contents
Advertisement
MS XX07 Series Integration Guide
The rule specifies the editing conditions and requirements before data transmission occurs.
Using ADF Bar Codes
When programming a rule, make sure the rule is logically correct. Plan ahead before
scanning.
To program each data formatting rule:
•
Start the Rule. Scan the
•
Criteria. Scan the bar codes for all pertinent criteria. Criteria can include code type
(e.g., Code 128), code length, or data that contains a specific character string (e.g.,
the digits "129"). These options are described in
•
Actions. Scan all actions related to, or affecting, these criteria. The actions of a
rule specify how to format the data for transmission. These options are described
in
ADF Bar Code Menu Example
•
Save the Rule. Scan the
in the "top" position in the rule buffer.
•
If you make errors during this process, some special-purpose bar codes can be
useful: Erase Criteria and Start Again, Erase Actions and Start Again, Erase
Previously Saved Rule, etc.
Erase criteria, actions, and entire rules by scanning the appropriate bar code (see page
9).
Standard Beeper Definitions
13-2
Begin New Rule
on page 13-3.
Save Rule
bar code on page 13-9. This places the rule
on page 3-8 help guide you through the programming steps.
bar code on page 13-8.
Criteria
on page 13-12.
13-
Advertisement
Table of Contents
