Scan Bar Codes (Add Items To Memory) - Symbol CS 2000 Owner's Manual

Scan Bar Codes (Add Items to Memory)

Aim the scanner at a bar code as shown.
Press and hold the Scan Button until you hear a beep and the
blinking green LED turns solid green.
Delete Bar Codes (Remove an Item from
Memory)
To delete a single item, aim the scanner at a bar code as shown. Press
and hold the Delete Button until you hear a beep and the blinking
amber LED turns solid amber.
Clear the Memory (Remove All Items from Memory)
Use the delete button (-) to clear the CS 2000 memory of all stored items.
Aim the scanner away
from any bar codes.
Press and hold the
Delete Button for 6
seconds,
until you hear a long
unique beep tone.
O w n e r ’ s
Delete Button
G u i d e
7
Scan Button
Delete Button