Table of Contents
Advertisement
MS XX07 Series Integration Guide
Set Lengths for Interleaved 2 of 5
Parameter # L1 = 16h, L2 = 17h
The length of a code refers to the number of characters (i.e., human readable characters)
the code contains, and includes check digits. Lengths for I 2 of 5 can be set for any length,
one or two discrete lengths, or lengths within a specific range.
One Discrete Length - Select this option to decode only those codes containing a selected
length. For example, select I 2 of 5 One Discrete Length, then scan 1, 4, to decode only
I 2 of 5 symbols containing 14 characters. Numeric bar codes begin on
page
10-132. To
change the selection or cancel an incorrect entry, scan the
Cancel
bar code on
page 10-
134.
*I 2 of 5 - One Discrete Length
Two Discrete Lengths - Select this option to decode only those codes containing two
selected lengths. For example, select I 2 of 5 Two Discrete Lengths, then scan 0, 2, 1, 4,
to decode only I 2 of 5 symbols containing 2 or 14 characters. Numeric bar codes begin
on
page
10-132. To change the selection or cancel an incorrect entry, scan the
Cancel
bar
code on
page
10-134.
I 2 of 5 - Two Discrete Lengths
10-76
Advertisement
Table of Contents
