Antenna Installation Procedure - Vertex Standard VXD series Installation Manual

3.5.2 Antenna Installation Procedure

1. Mount the antenna according to the instructions provided with the antenna kit. Run the coaxial ca-
ble to the radio mounting location. If necessary, cut off the excess cable and install the cable con-
nector.
2. Connect the antenna cable connector to the radio antenna connector on the rear of the radio.
3. In case of a GPS model, connect the GPS antenna to the GPS antenna connector on the rear of
the radio.
Figure 3-9 Antenna connections on the back of the radio
Chapter 3 Installation Details for Standard Configurations
Page 29