Antenna Installation - Vertex Standard EVX-5400 Operating Manual

You now have at your fingertips a valuable communications tool: a Vertex Stan-
dard two-way radio! Rugged, reliable and easy to use, your Vertex Standard radio
will keep you in constant touch with your colleagues for years to come, with negli-
gible maintenance downtime.
Please take a few minutes to read this manual carefully. The information presented
here will allow you to derive maximum performance from your radio.
We're glad you joined the Vertex Standard team. Call on us anytime, because com-
munications is our business. Let us help you get your message across.
There are no owner-serviceable parts inside the transceiver. All service jobs
must be referred to an authorized Vertex Standard Service Representative.
Consult your Authorized Vertex Standard dealer for installation of optional
accessories.
WARNING - DO NOT operate the EVX-5400 radio when any person(s)
(bystanders) outside the vehicle are within the distances shown in the chart
at the bottom of this section.
Safety Training information:
Antennas used for this transmitter must not exceed an antenna gain of
0 dBi. The radio must be used in vehicle-mount configurations with a maxi-
mum operating duty cycle not exceeding 50 %, in typical Push-to-Talk con-
figurations.
This radio is restricted to occupational use, work related operations only
where the radio operator must have the knowledge to control the exposure
limits of passengers and bystanders by maintaining the minimum separa-
tion distance shown below.
Failure to observe these restrictions will result in exceeding the FCC RF
exposure limits.

Antenna Installation:

For rear deck trunk installation, the antenna must be located at least the fol-
lowing distance away from rear-seat passengers in order to comply with the
FCC RF exposure requirements.
For roof top installations, the antenna must be placed in the center of the
roof.
Congratulations!
N
otice
S /W
afety arNiNg
Unsafe Radiation Distance
VHF Model
2.9 Feet ( 0.89 m )
!
i
NformatioN
UHF Model
2.1 Feet ( 0.64 m )