Chapter 4 Options And Accessories Installation; Accessory Installation - Vertex Standard VXD series Installation Manual

Chapter 4 Options and Accessories Installation

4.1 Accessory Installation

The accessories must be installed through the rear accessory connector that is located on the rear
of the radio, adjacent to the power connector. Most of the Vertex Standard-approved accessories are
supplied with female terminals crimped to a 20-gauge wire specifically designed to fit the plug of the
rear accessory connector.
Insert the female terminal into the accessory connector assembly in the appropriate locations. The
accessory connector assembly is provided together with the accessory. Connect the accessory con-
nector assembly to the rear accessory connector on the back of the mobile. Do not use other generic
terminals in the plug. Generic terminals can cause electrical intermittences and may cause damage to
the plug.
Figure 4-1 Location of the Rear Accessory Connector
Chapter 4 Options and Accessories Installation
Page 33