Installing The Music Stand; Returning The Digital Keyboard To Its Factory Default Settings; Separate Tutorial Manual - Casio MZ-X300 User Manual

General Guide
Back
MIDI OUT/THRU, IN terminals
USB port

* Installing the Music Stand

Insert the bottom of the music stand into the groove on
the top of the Digital Keyboard's console.
LCD Panel
The liquid crystal panel of the monitor screen uses
high-precision technology that provides a pixel yield in
excess of 99.99%. This means that some very small
number of pixels may not light or may remain lit at all
times. This is due to the characteristics of the liquid
crystal panel, and does not indicate malfunction.
EN-6
LINE IN R, L/MONO jacks
PEDAL2, EXPRESSION jack
PEDAL1 jack
MIC VOLUME controller
MIC IN jack
DC 24V terminal
AUDIO IN jack
Returning the Digital
Keyboard to Its Factory
Default Settings
Perform the following procedure when you want to
return the Digital Keyboard's stored data and settings
to their initial factory defaults.
1.
Turn off the Digital Keyboard.
2.
While holding down the
buttons, press the 1 P button.
• The Digital Keyboard will turn on and initialize its
internal system. You will be able to use the Digital
Keyboard in a short while.
• See "Turning Power On or Off" (page EN-7) for
information about turning power on and off.

Separate Tutorial Manual

You can download the separate "Tutorial Manual" and
"Appendix"* from the website below.
http://world.casio.com/
* Tone and rhythm lists
LINE OUT R, L/MONO jacks
AUDIO VOLUME
controller
TEMPO w, q
7