Atx motherboard supports lga775 intel core 2 duo/quad cpu with 1333/1066/800mhz fsb, ddr3, dual pcie gbe, isa, pci, pcie x16, 6com, lpt, sata ii, ide, usb 2.0, audio and rohs (12 pages)
Atx motherboard, intel pentium 4 processor with vga, dual sata, eight usb 2.0, six com, agp, five pci, two isa, gigabit ethernet and compactflash (239 pages)
Atx motherboard for 22nm lg a 1155 intel core i7/i5/i3 cpu, intel q77 chipset, ddr3, dual hdmi/dvi-i, dual intel pcie gbe, usb 3.0, sata 6gb/s, hd audio and rohs (211 pages)
Summary of Contents for IEI Technology IMBA-G412ISA
Page 1
2012/3/62012/3/6 IMBA-G412IS A ATX Mo th e rb o a rd IEI Te c h n o lo g y Co rp . MODEL: IMBA-G412IS A ATX Mo th e rb o a rd fo r In te l® Co re ™2 Du o /Qu a d CP U, 800/1066/1333 MHz FS B, DDR3, VGA, LAN, S ATA 3Gb /s , P CIe x16, P CI, IS A, US B, HD Au d io , Ro HS Co m p lia n t Us e r Ma n u a l...
Page 2
ii3/6/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Re vis io n Date Version Changes 6 March, 2012 2.00 Update the version number 20 January, 2012 1.01 Update the BIOS section 26 October, 2010 1.00 Initial release P a g e ii...
Page 3
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Co p yrig h t COP YRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer.
iv1/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Ta b le o f Co n te n ts 1 INTRODUCTION ......................1 1.1 I ......................2 NTRODUCTION 1.2 B ........................2 ENEFITS 1.3 F ........................3 EATURES 1.4 C ......................
Page 5
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd 3.2.11 Power Connector .................... 27 3.2.12 RS-232 Serial Port Connectors ..............28 3.2.13 RS-232/422/485 Serial Port Connector ............29 3.2.14 SATA Drive Connectors ................. 30 3.2.15 SMBus Connector ..................30 3.2.16 SPI Flash Connector ..................
Page 6
vi1/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd 4.6 E ........... 58 XTERNAL ERIPHERAL NTERFACE ONNECTION 4.6.1 Audio Connector ....................58 4.6.2 PS/2 Keyboard and Mouse Connection ............59 4.6.3 LAN Connection ....................60 4.6.4 Parallel Device Connection ................61 4.6.5 Serial Device Connection ................
Page 7
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd 5.7.2 South Bridge Chipset Configuration .............. 102 5.8 E ........................104 A BIOS OPTIONS ......................106 B TERMINOLOGY ....................... 110 C ONE KEY RECOVERY .................... 114 C.1 O ..............115 ECOVERY NTRODUCTION C.1.1 System Requirement ..................
Page 8
IMBA-G412IS A ATX Mo th e rb o a rd Lis t o f Fig u re s Figure 1-1: IMBA-G412ISA ......................2 Figure 1-2: Connectors ........................4 Figure 1-3: Dimensions (mm) ......................5 Figure 1-4: Data Flow Diagram ...................... 6 Figure 3-1: Connectors and Jumpers ..................
Page 9
Figure 4-4: Insert the Socket LGA775 CPU ................46 Figure 4-5: Cooling Kits ....................... 47 Figure 4-6: Securing the Heat sink to the IMBA-G412ISA ............48 Figure 4-7: DIMM Installation ....................... 49 Figure 4-8: AT/ATX Power Select Jumper Location ..............51 Figure 4-9: Clear BIOS Jumper Location ...................
Page 10
x1/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Figure C-14: Select a Local Source Drive ................127 Figure C-15: Select a Source Partition from Basic Drive ............127 Figure C-16: File Name to Copy Image to ................128 Figure C-17: Compress Image ....................128 Figure C-18: Image Creation Confirmation ................129 Figure C-19: Image Creation Complete ..................129 Figure C-20: Image Creation Complete ..................129...
Page 11
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Lis t o f Ta b le s Table 1-1: Technical Specifications ....................9 Table 2-1: Packing List ......................... 13 Table 2-2: Optional Items ......................14 Table 3–1: Internal Peripheral Connectors ................18 Table 3–2: External Peripheral Connectors ................
Page 12
xii1/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Table 4-3: Clear BIOS Jumper Settings ..................51 Table 4-4: COM 2 Function Select Jumper Settings ..............52 Table 4-5: CompactFlash® Setup Jumper Settings ..............53 Table 4-6: LCD Voltage Selection Jumper Settings ..............54 Table 4-7: USB Power Select Jumper Settings .................
Page 13
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd BIOS Me n u s BIOS Menu 1: Main ........................69 BIOS Menu 2: Advanced ......................70 BIOS Menu 3: CPU Configuration ....................71 BIOS Menu 4: IDE Configuration ....................72 BIOS Menu 5: IDE Master and IDE Slave Configuration ............
The IMBA-G412ISA is an ATX motherboard with an 800/1066/1333 MHz front side bus. The LGA775 socket accepts Intel® Core™2 Duo/Quad processors and the motherboard supports two DDR3 DIMMs up to 4.0 GB each (8.0 GB total). The IMBA-G412ISA includes VGA output with up to QXGA resolution. Multiple expansion cards may be added, including PCIe x16, PCI and ISA interface.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd 1.3 Fe a tu re s Some of the IMBA-G412ISA motherboard features are listed below: ATX form factor RoHS compliant LGA775 CPU socket Supports two DDR3 DIMMs ...
41/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd 1.4 Co n n e c to rs The connectors on the IMBA-G412ISA are shown in the figure below. Figure 1-2: Connectors P a g e 4...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd 1.5 Dim e n s io n s The main dimensions of the IMBA-G412ISA are shown in the diagram below. Figure 1-3: Dimensions (mm) P a g e 5...
61/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd 1.6 Da ta Flo w Figure 1-4 shows the data flow between the system chipset, the CPU and other components installed on the motherboard. Figure 1-4: Data Flow Diagram P a g e 6...
IMBA-G412IS A ATX Mo th e rb o a rd 1.7 Te c h n ic a l Sp e c ific a tio n s IMBA-G412ISA technical specifications are shown below. S p e c ific a tio n s...
Page 22
81/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd I/O In te rfa c e One line-in Au d io J a c k One line-out One mic-in One 4-pin wafer for CPU fan Fa n c o n n e c to r Three 3-pin wafer for system fans Two external PS/2 connectors Ke yb o a rd /Mo u s e...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd P h ys ic a l S p e c ific a tio n s 305 mm x 244 mm Dim e n s io n s 1200 g / 750 g We ig h t (Gro s s /Ne t) Table 1-1: Technical Specifications P a g e 9...
Only handle the edges of the PCB: Don't touch the surface of the motherboard. Hold the motherboard by the edges when handling. 2.2 Un pa c kin g P re c a u tio n s When the IMBA-G412ISA is unpacked, please do the following: Follow the antistatic guidelines above.
If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the IMBA-G412ISA was purchased from or contact an IEI sales representative directly by sending an email to sales@iei.com.tw.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Qu a n tity Ite m a n d P a rt Nu m b e r Im a g e Utility CD Quick Installation Guide Table 2-1: Packing List 2.4 Op tio n a l Ite m s The following are optional components which may be separately purchased: Ite m a n d P a rt Nu m b e r...
141/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Ite m a n d P a rt Nu m b e r Im a g e ATA 66/100 flat cable (P/N: 32200-000052-RS) USB cable (P/N: CB-USB02-RS SATA power cable (P/N: 32102-000100-200-RS) DVI output SDVO card (P/N: SDVO-100DVI-R10)
161/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd 3.1 P e rip h e ra l In te rfa c e Co n n e c to rs This chapter details all the jumpers and connectors. 3.1.1 La yo u t The figure below shows all the connectors and jumpers.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd 3.1.2 P e rip h e ra l In te rfa c e Co n n e c to rs The table below lists all the connectors on the board. Co n n e c to r Typ e La b e l...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Figure 3-2: Audio Connector Location Description Description MIC_L Audio GND MIC_R FP_AUO_DETECT LINE_R F_SENSE LINE_L Table 3-3: Audio Connector Pinouts 3.2.2 CP U Fa n Co n n e c to r CN La b e l: CP U_FAN1 4-pin wafer...
201/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Figure 3-3: CPU Fan Connector Location Description +12 V Fan In Fan Control Table 3-4: CPU Fan Connector Pinouts 3.2.3 S ys te m Fa n Co n n e c to rs CN La b e l: NB_FAN1, S YS _FAN1 a n d S YS _FAN2 3-pin wafer...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Description FANIN2 +12 V Table 3-5: System Fan Connector Pinouts (SYS_FAN1) Description +12 V Table 3-6: System Fan Connector Pinouts (SYS_FAN2 and SYS_FAN3) 3.2.4 CP U P o we r In p u t Co n n e c to r CN La b e l: CP U12V1 4-pin connector...
221/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd 3.2.5 Dig ita l I/O Co n n e c to r CN La b e l: DIO1 10-pin header CN Typ e : CN Lo c a tio n : See Figure 3-6 CN P in o u ts : See Table 3-8...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd CN Lo c a tio n : See Figure 3-7 See Table 3-9 CN P in o u ts : The front panel connector connects to the indicator LEDs and buttons on the computer's front panel.
241/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd The IDE connector can connect to an IDE hard drive or optical device. Figure 3-8: IDE Connector Location Description Description RESET# GROUND DATA 7 DATA 8 DATA 6 DATA 9 DATA 5 DATA 10 DATA 4...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd 3.2.8 In fra re d In te rfa c e Co n n e c to r CN La b e l: 5-pin header (1x5) CN Typ e : CN Lo c a tio n : See Figure 3-9 CN P in o u ts :...
261/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd The DIMM slots are for DDR3 DIMM memory modules. Figure 3-10: Memory Card Slot Location 3.2.10 P CIe P o we r In p u t Co n n e c to r CN La b e l: P NC1 3-pin wafer (1x3)
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Description VCC +5 V VCC +12 V Table 3-12: PCIe Power Input Connector Pinouts 3.2.11 P o we r Co n n e c to r CN La b e l: P WR2 24-pin connector CN Typ e :...
281/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Description Description +12V +12V +3.3V Table 3-13: Power Connector Pinouts 3.2.12 RS -232 S e ria l P o rt Co n n e c to rs CN La b e l: COM3, COM4, COM5, COM6 10-pin box header CN Typ e :...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Description NCTS NDTR Table 3-14: Serial Port Connector Pinouts 3.2.13 RS -232/422/485 S e ria l P o rt Co n n e c to r CN La b e l: COM2 14-pin box header CN Typ e :...
301/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Description Description Table 3-15: RS-232/422/485 Serial Port Connector Pinouts 3.2.14 S ATA Drive Co n n e c to rs CN La b e l: S ATA1, S ATA2, S ATA3, S ATA4 7-pin SATA drive connectors CN Typ e : CN Lo c a tio n :...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Figure 3-16: SMBus Connector Locations Description SMBDATA SMBCLK Table 3-16: SMBus Connector Pinouts 3.2.16 S P I Fla s h Co n n e c to r CN La b e l: J S P I1 8-pin header CN Typ e :...
321/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Figure 3-17: SPI Flash Connector Description Description +3.3V CLOCK Table 3-17: SPI Flash Connector 3.2.17 TP M Co n n e c to r CN La b e l: TP M1 20-pin header (2x10) CN Typ e :...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Figure 3-18: TPM Connector Pinout Location Description Description TPMCLK LFRAME- PCIRST4- +5 V LAD3 LAD2 LAD0 LAD1 SMBCLK_MAIN SMBDATA_MAIN +3.3 V SERIRQ CLKRUN- +3.3 V LDRQ- Table 3-18: TPM Connector Pinouts 3.2.18 US B Co n n e c to rs CN La b e l: US B3, US B4...
341/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Figure 3-19: USB Connector Pinout Locations Description Description USBP4/6# USBP5/7 USBP4/6 USBP5/7# Table 3-19: USB Port Connector Pinouts 3.3 Exte rn a l P e rip h e ra l In te rfa c e Co n n e c to r P a n e l The figure below shows the external peripheral interface connector (EPIC) panel.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd 3.3.1 Au d io Co n n e c to rs CN La b e l: AUDIO1 Audio jacks CN Typ e : CN Lo c a tio n : See Figure 3-20 The audio jacks connect to external audio devices.
361/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Figure 3-22: PS/2 Pinout and Configuration Description Description KB_DATA MS_CLK KB_CLK KB_GND MS_DATA KB_GND Table 3-20: Keyboard Connector Pinouts 3.3.3 LAN Co n n e c to rs CN La b e l: LAN1, LAN2 RJ-45 CN Typ e :...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Description Description LAN1/2_MDI0+ LAN1/2_MDI3- LAN1/2_MDI0- LAN1/2_MDI1+ LAN1/2_LINK100 LAN1/2_MDI1- LAN1/2_LINK1000 LAN1/2_MDI2+ LAN1/2_LED0 LAN1/2_MDI2- 3.3 V Table 3-21: LAN Pinouts 3.3.4 P a ra lle l P o rt Co n n e c to r CN La b e l: 3IN1_DS UB1A CN Typ e :...
381/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Figure 3-23: Parallel Port Connector Location 3.3.5 S e ria l P o rt Co n n e c to r (COM1) CN La b e l: 3IN1_DS UB1B (COM1) DB-9 Male CN Typ e : See Figure 3-20...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd 3.3.6 US B Co n n e c to rs CN La b e l: US B1, US B2 USB port CN Typ e : CN Lo c a tio n : See Figure 3-20 CN P in o u ts : See Table 3-24...
401/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Description Description GREEN BLUE CRT_PLUG# VGAVCC DDC DAT HSYNC VSYNC DDCCLK Table 3-25: VGA Connector Pinouts P a g e 40...
IMBA-G412ISA and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IMBA-G412ISA. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the IMBA-G412ISA or any other electrical component is handled, the following anti-static precautions are strictly adhered to.
Page 57
Turn all power to the IMBA-G412ISA off: When working with the IMBA-G412ISA, make sure that it is disconnected from all power supplies and that no electricity is being fed into the system. Before and during the installation of the IMBA-G412ISA DO NOT: ...
441/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd 4.3 Ba s ic In s ta lla tio n This section outlines the parts that must be installed for the system to function correctly. 4.3.1 CP U In s ta lla tio n NOTE: To enable Hyper-Threading, the CPU and chipset must both support it.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd WARNING: DO NOT touch the pins at the bottom of the CPU. When handling the CPU, only hold it on the sides. S te p 1: Remove the protective cover. The black protective cover can be removed by pulling up on the tab labeled "Remove".
461/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Inspect the CPU socket. Make sure there are no bent pins and make sure the S te p 3: socket contacts are free of foreign material. If any debris is found, remove it with compressed air.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd 4.3.2 Co o lin g Kit In s ta lla tio n WARNING: DO NOT use the original Intel® heat sink and fan. A proprietary one is recommended. Figure 4-5: Cooling Kits The cooling kit can be bought from IEI.
S te p 6: Connect the fan cable. Connect the cooling kit fan cable to the fan connector on the IMBA-G412ISA. Carefully route the cable and avoid heat generating chips and fan blades. S te p 0:...
0: 4.3.4 Mo th e rb o a rd In s ta lla tio n To install the IMBA-G412ISA motherboard into the chassis please refer to the reference material that came with the chassis. P a g e 49...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd J u m p e r Lo c a tio n : See Figure 4-8 The AT Power Select jumper specifies the systems power mode as AT or ATX. Setting Description Open...
521/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Figure 4-9: Clear BIOS Jumper Location 4.4.3 COM 2 Fu n c tio n S e le c t J u m p e r J u m p e r La b e l: J P 4 6-pin header J u m p e r Typ e :...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd 4.4.4 Co m pa c tFla s h ® S e tu p J u m p e r La b e l: J P 2 2-pin header J u m p e r Typ e : See Table 4-5 J u m p e r S e ttin g s : J u m p e r Lo c a tio n :...
541/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Setting Description Short 1-2 +5.0 V Short 2-3 +3.3 V Table 4-6: LCD Voltage Selection Jumper Settings Figure 4-12: LCD Voltage Selection Jumper Location 4.4.6 US B P o we r S e le c t J u m p e rs J u m p e r La b e l: US BP W12, US BP 34 J u m p e r Typ e :...
This section outlines the installation of peripheral devices to the onboard connectors. 4.5.1 S ATA Drive Co n n e c tio n The IMBA-G412ISA is shipped with two SATA drive cables and one SATA drive power cable. To connect the SATA drives to the connectors, please follow the steps below.
561/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Figure 4-14: SATA Drive Cable Connection S te p 3: Connect the cable to the SATA disk. Connect the connector on the other end of the cable to the connector at the back of the SATA drive. See Figure 4-15. S te p 4: Connect the SATA power cable.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Figure 4-15: SATA Power Drive Connection 4.5.2 Du a l RS -232 Ca b le with S lo t Bra c ke t The dual RS-232 cable slot connector consists of two connectors attached to two independent cables.
IMBA-G412ISA. 4.6.1 Au d io Co n n e c to r The audio jacks on the external audio connector enable the IMBA-G412ISA to be connected to a stereo sound setup. To install the audio devices, follow the steps below.
4.6.2 P S /2 Ke yb o a rd a n d Mo u s e Co n n e c tio n The IMBA-G412ISA has a dual PS/2 connector on the external peripheral interface panel. The dual PS/2 connector is used to connect to a keyboard and mouse to the system.
Locate the RJ-45 connectors. The locations of the USB connectors are shown in Chapter 4. S te p 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of the RJ-45 connectors on the IMBA-G412ISA. See Figure 4-19. P a g e 60...
4.6.4 P a ra lle l De vic e Co n n e c tio n The IMBA-G412ISA has a single female DB-25 connector on the external peripheral interface panel for parallel devices. Follow the steps below to connect a parallel device to the IMBA-G412ISA.
4.6.5 S e ria l De vic e Co n n e c tio n The IMBA-G412ISA has one male DB-9 connectors on the external peripheral interface panel for a serial device. Follow the steps below to connect a serial device to the IMBA-G412ISA.
The external USB Series "A" receptacle connectors provide easier and quicker access to external USB devices. Follow the steps below to connect USB devices to the IMBA-G412ISA. Locate the USB Series "A" receptacle connectors. The location of the USB S te p 1: Series "A"...
4.6.7 VGA Mo n ito r Co n n e c tio n The IMBA-G412ISA has a single female DB-15 connector on the external peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor to the IMBA-G412ISA, please follow the instructions below.
S te p 0: 4.7 S o ftwa re In s ta lla tio n All the drivers for the IMBA-G412ISA are on the CD that came with the system. To install the drivers, please follow the steps below. S te p 1: Insert the CD into a CD drive connected to the system.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd 5.1 In tro d u c tio n The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. 5.1.1 Sta rtin g S e tu p The AMI BIOS is activated when the computer is turned on.
681/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Ke y Fu n c tio n F2/F3 key Change color from total 3 colors. F2 to select color forward Save all the CMOS changes, only for Main Menu Table 5-1: BIOS Navigation Keys 5.1.3 Ge ttin g He lp When F1 is pressed a small help window describing the appropriate keys to use and the...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd 5.2 Ma in The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. BIOS SETUP UTILITY Main Advanced...
701/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd The System Overview field also has two user configurable fields: S ys te m Tim e [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd 5.3.1 CP U Co n fig u ra tio n Use the CPU Configuration menu (BIOS Menu 3) to view detailed CPU specifications and configure the CPU. BIOS SETUP UTILITY Advanced Configure advanced CPU Settings Module Version:3F.15...
721/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd BIOS SETUP UTILITY Advanced IDE Configuration Options Disabled ATA/IDE Configuration [Enhanced] Compatible Configure SATA as [IDE] Enhanced Configure SATA Channels [Before PATA] > Primary IDE Master : [Not Detected] ...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Co n fig u re S ATA Ch a n n e ls [Be fo re PATA] Use the Configure SATA Channels option to determine how SATA channels and PATA channels are ordered.
741/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd BIOS SETUP UTILITY Advanced Primary IDE Master Select the type of device connected to the system. Device :Not Detected Type [Auto] LBA/Large Mode [Auto] Block (Multi-Sector Transfer) [Auto] ...
Page 89
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd 32Bit Data Transfer: Enables 32-bit data transfer. Typ e [Au to ] Use the Type BIOS option select the type of device the AMIBIOS attempts to boot from after the Power-On Self-Test (POST) is complete.
Page 90
761/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Blo c k (Mu lti S e c to r Tra n s fe r) [Au to ] Use the Block (Multi Sector Transfer) to disable or enable BIOS to auto detect if the device supports multi-sector transfers.
Page 91
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd SWDMA0 Single Word DMA mode 0 selected with a maximum data transfer rate of 2.1MBps Single Word DMA mode 1 selected with a maximum data SWDMA1 transfer rate of 4.2MBps ...
Page 92
781/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd S .M.A.R.T [Au to ] Use the S.M.A.R.T option to auto-detect, disable or enable Self-Monitoring Analysis and Reporting Technology (SMART) on the drive on the specified channel. S.M.A.R.T predicts impending drive failures.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd 5.3.3 S u p e r IO Co n fig u ra tio n Use the Super IO Configuration menu (BIOS Menu 6) to set or change the configurations for the serial ports. BIOS SETUP UTILITY Advanced Configure F81865F Super IO Chipset...
Page 94
801/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd IRQ3 Serial port 1 IRQ address is IRQ3 S e ria l P o rt2 Ad d re s s [2F8] Use the Serial Port2 Address option to select the Serial Port 2 base address. ...
Page 95
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Serial port 3 IRQ address is 10 EFAULT S e ria l P o rt4 Ad d re s s [2E8] Use the Serial Port4 Address option to select the Serial Port 4 base address. ...
Page 96
821/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Serial Port 6 I/O port address is 328 EFAULT S e ria l P o rt6 IRQ [10] Use the Serial Port6 IRQ option to select the interrupt address for serial port 6. ...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd capabilities port (ECP) mode. The ECP mode supports bi-directional communication between the system and the parallel port device and the transmission rates between the two are much faster than the Normal mode ...
841/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd BIOS SETUP UTILITY Advanced Hardware Health Configuration Fan configuration mode setting CPU FAN Mode Setting [Auto Fan by RPM] CPU Temp. Limit of Highest [050] CPU Temp. Limit of Second [040] CPU Temp.
Page 99
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Auto Fan by The fan adjusts its speed using Auto Fan by Duty-Cycle Duty-Cycle settings The fan spins at the speed set in Manual Mode by Manual Mode RPM settings by RPM ...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd BIOS SETUP UTILITY Advanced Select AT/ATX Power [BY HARDWARE] Default set AUTO is Current Jumper Setting [ATX Power] detect power supply status. > ACPI Configuration If set AT Power, Power State will Auto set Power ...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd BIOS SETUP UTILITY Advanced Configure Remote Access type and parameters Select Remote Access type. Remote Access [Enabled] Serial port number [COM1] Base Address, IRQ [3F8H, 4] Serial Port Mode [115200 8,n,1] ...
Page 104
901/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd S e ria l p o rt n u m b e r [COM1] Use the Serial port number option to select the serial port used for remote access. ...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd NOTE: Identical baud rate setting must be set on the host (a management computer running a terminal software) and the slave Re d ire c tio n Afte r BIOS P OS T [Alwa ys ] Use the Redirection After BIOS POST option to specify when console redirection should occur.
921/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit USB Configuration Options Disabled Module Version – 2.24.3-13.4 Enabled USB Devices Enabled: 1 Keyboard Select Screen ↑ ↓ USB Functions [Enabled] Select Item...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Disabled Legacy USB support disabled Legacy USB support enabled Enabled EFAULT Auto Legacy USB support disabled if no USB devices are connected US B 2.0 Co n tro lle r Mo d e [HiSp e e d ] The USB2.0 Controller Mode BIOS option sets the speed of the USB2.0 controller.
941/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd TPM support is disabled. EFAULT TPM support is enabled. 5.4 P CI/P n P Use the PCI/PnP menu (BIOS Menu 13) to configure advanced PCI and PnP settings. WARNING: Setting wrong values for the BIOS selections in the PCIPnP BIOS menu may cause the system to malfunction.
Page 109
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Use the IRQ# address to specify what IRQs can be assigned to a particular peripheral device. Available The specified IRQ is available to be used by EFAULT PCI/PnP devices ...
961/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd DM Channel 6 DM Channel 7 Re s e rve d Me m o ry S ize [Dis a b le d ] Use the Reserved Memory Size BIOS option to specify the amount of memory that should be reserved for legacy ISA devices.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd BIOS SETUP UTILITY Boot Boot Settings Configuration Allows BIOS to skip certain tests while booting. This will Quick Boot [Enabled] decrease the time needed Quiet Boot [Enabled] to boot the system. AddOn ROM Display Mode [Force BIOS] Bootup Num-Lock...
981/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Keep Current Allows the computer system to display the information during system boot. Bo o tu p Nu m -Lo c k [On ] The Bootup Num-Lock BIOS option allows the Number Lock setting to be modified during boot up.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit Security Settings Install or Change the password. Supervisor Password :Not Installed User Password :Not Installed Change Supervisor Password Change User Password ...
1001/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd 5.7 Ch ips e t Use the Chipset menu (BIOS Menu 17) to access the NorthBridge and SouthBridge configuration menus. WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction.
1021/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Disabled 32MB of memory used by internal graphics device Enabled, 32MB EFAULT Enabled, 64MB 64MB of memory used by internal graphics device Enabled, 128MB 128MB of memory used by internal graphics device 5.7.2 S o u th Brid g e Ch ips e t Co n fig u ra tio n The South Bridge Chipset Configuration menu (BIOS Menu 19) allows the southbridge...
Page 117
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Use the Spread Spectrum Function option to reduce the EMI. Excess EMI is generated when the system clock generator pulses have extreme values. Spreading the pulse spectrum modulates changes in the extreme values from spikes to flat curves, thus reducing the EMI.
1041/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd 5.8 Exit Use the Exit menu (BIOS Menu 20) to load default BIOS values, optimal failsafe values and to save configuration changes. BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit...
Page 119
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Lo a d Fa ils a fe De fa u lts Use the Load Failsafe Defaults option to load failsafe default values for each of the parameters on the Setup menus. F8 key can be used for this operation. P a g e 105...
1061/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Ap p e n d ix BIOS Op tio n s P a g e 106...
Page 121
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Below is a list of BIOS configuration options in the BIOS chapter. System Overview ......................... 69 System Time [xx:xx:xx] ....................... 70 System Date [xx/xx/xx] ......................70 ...
Page 122
1081/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd CPU Temp. Limit of Highest / Second / Third / Lowest [n] ..........85 CPU Fan Highest Setting [100] ................... 85 CPU Fan Second / Third / Fourth / Lowest Setting [n] ............. 85 ...
Page 123
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Audio Controller [Auto] .....................102 Spread Spectrum Function [Disabled] ................102 Restore on AC Power Loss [Power On] ................103 Resume On RTC Alarm [Disabled] ...................103 RTC Alarm Date (Days) ......................103 ...
1101/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Ap p e n d ix Te rm in o lo g y P a g e 110...
Page 125
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. Advanced Configuration and Power Interface (ACPI) is an OS-directed ACP I configuration, power management, and thermal management interface. Advanced Host Controller Interface (AHCI) is a SATA Host controller AHCI register-level interface.
Page 126
1121/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd DIMM Dual Inline Memory Modules are a type of RAM that offer a 64-bit data bus and have separate electrical contacts on each side of the module. The digital inputs and digital outputs are general control signals that control the on/off circuit of external devices or TTL devices.
Page 127
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd LVDS Low-voltage differential signaling (LVDS) is a dual-wire, high-speed differential electrical signaling system commonly used to connect LCD displays to a computer. P OS T The Power-on Self Test (POST) is the pre-boot actions the system performs when the system is turned-on.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd C.1 On e Ke y Re c o ve ry In tro d u c tio n The IEI one key recovery is an easy-to-use front end for the Norton Ghost system backup and recovery tool.
1161/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd C.1.1 S ys te m Re q u ire m e n t NOTE: The recovery CD can only be used with IEI products. The software will fail to run and a warning message will appear when used on non-IEI hardware.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd NOTE: Specialized tools are required to change the partition size if the operating system is already installed. C.1.2 S u p p o rte d Op e ra tin g S ys te m The recovery CD is compatible with both Microsoft Windows and Linux operating system (OS).
1181/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd NOTE: Installing unsupported OS versions may cause the recovery tool to fail. C.2 S e tu p P ro c e d u re fo r Win d o ws Prior to using the recovery tool to backup or restore Windows system, a few setup procedures are required.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Turn on the system. S te p 4: Press the <DELETE> key as soon as the system is turned on to enter the BIOS. S te p 5: boot device. (Boot Boot Select the connected optical disk drive as the 1 S te p 6: Device Priority ...
1201/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd The recovery tool setup menu is shown as below. S te p 3: Figure C-3: Recovery Tool Setup Menu S te p 4: Press <5> then <Enter>. Figure C-4: Command Mode S te p 5: The command prompt window appears.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd system32>format F: /fs:ntfs /q /v:Recovery /y system32>exit Figure C-5: Partition Creation Commands P a g e 121...
1221/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd NOTE: Use the following commands to check if the partitions were created successfully. Press any key to exit the recovery tool and automatically reboot the system. S te p 6: Please continue to the following procedure: Build-up Recovery Partition.S t e p 0 : C.2.3 In s ta ll Op e ra tin g S ys te m , Drive rs a n d Ap p lic a tio n s...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd C.2.4 Bu ild -u p Re c o ve ry P a rtitio n Put the recover CD in the optical drive. S te p 1: S te p 2: Start the system.
1241/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd recovery files in Section C.2.2 is hidden and the recovery tool is saved in this partition. Figure C-8: Build-up Recovery Partition S te p 6: After completing the system configuration, press any key in the following window to reboot the system.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd C.2.5 Cre a te Fa c to ry De fa u lt Im a g e NOTE: Before creating the factory default image, please configure the system to a factory default environment, including driver and application installations.
1261/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Figure C-12: About Symantec Ghost Window Use mouse to navigate to the option shown below (Figure C-13). S te p 4: Figure C-13: Symantec Ghost Path Select the local source drive (Drive 1) as shown in Figure C-14. Then click OK. S te p 5: P a g e 126...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd Figure C-14: Select a Local Source Drive S te p 6: Select a source partition (Part 1) from basic drive as shown in Figure C-15. Then click OK. Figure C-15: Select a Source Partition from Basic Drive Select 1.2: [Recovery] NTFS drive and enter a file name called S te p 7: (Figure C-16).
1281/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Figure C-16: File Name to Copy Image to When the Compress Image screen in Figure C-17 prompts, click High to make S te p 8: the image file smaller. Figure C-17: Compress Image P a g e 128...
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd The Proceed with partition image creation window appears, click Yes to S te p 9: continue. Figure C-18: Image Creation Confirmation The Symantec Ghost starts to create the factory default image (Figure C-19). S te p 10: Figure C-19: Image Creation Complete When the image creation completes, a screen prompts as shown in Figure C-20.
1301/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd The recovery tool main menu window is shown as below. Press any key to S te p 12: reboot the system. S t e p 0 : Figure C-21: Press Any Key to Continue C.3 S e tu p P ro c e d u re fo r Lin u x The initial setup procedures for Linux system are mostly the same with the procedure for Microsoft Windows.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd NOTE: Please reserve enough space for partition 3 for saving recovery images. Figure C-22: Partitions for Linux S te p 3: Create a recovery partition. Insert the recovery CD into the optical disk drive. Follow Step 1 Step 3...
1321/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Figure C-23: System Configuration for Linux S te p 5: Access the recovery tool main menu by modifying the “menu.lst”. To first access the recovery tool main menu, the menu.lst must be modified. In Linux system, enter Administrator (root).
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd S te p 7: The recovery tool menu appears. (Figure C-25) Figure C-25: Recovery Tool Menu Create a factory default image. Follow Step 2 Step 12 described in S te p 8: Section C.2.5 to create a factory default image.
1341/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Figure C-26: Recovery Tool Main Menu The recovery tool has several functions including: 6. Factory Restore: Restore the factory default image (iei.GHO) created in Section C.2.5. 7. Backup system: Create a system backup image (iei_user.GHO) which will be saved in the hidden partition.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd C.4.1 Fa c to ry Re s to re To restore the factory default image, please follow the steps below. S te p 1: Type <1> and press <Enter> in the main menu. The Symantec Ghost window appears and starts to restore the factory default.
1361/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd C.4.2 Ba c ku p S ys te m To backup the system, please follow the steps below. S te p 1: Type <2> and press <Enter> in the main menu. The Symantec Ghost window appears and starts to backup the system.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd C.4.3 Re s to re Yo u r La s t Ba c ku p To restore the last system backup, please follow the steps below. S te p 1: Type <3>...
1381/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd C.4.4 Ma n u a l To restore the last system backup, please follow the steps below. S te p 1: Type <4> and press <Enter> in the main menu. The Symantec Ghost window appears.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd C.5 Oth e r In fo rm a tio n C.5.1 Us in g AHCI Mo d e o r ALi M5283 / VIA VT6421A Co n tro lle r When the system uses AHCI mode or some specific SATA controllers such as ALi M5283 or VIA VT6421A, the SATA RAID/AHCI driver must be installed before using one key recovery.
Page 154
1401/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd When the following window appears, press <S> to select “Specify Additional S te p 5: Device”. In the following window, select a SATA controller mode used in the system. Then S te p 6: press <Enter>.
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd After pressing <Enter>, the system will get into the recovery tool setup menu. S te p 7: Continue to follow the setup procedure from Step 4 in Section C.2.2 Create Partitions to finish the whole setup process.
1421/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd Ap p e n d ix Wa tc h d o g Tim e r P a g e 142...
Page 157
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd NOTE: The following discussion applies to DOS. Contact IEI support or visit the IEI website for drivers for other operating systems. The Watchdog Timer is a hardware-based timer that attempts to restart the system when it stops working.
Page 158
1441/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd NOTE: The Watchdog Timer is activated through software. The software application that activates the Watchdog Timer must also deactivate it when closed. If the Watchdog Timer is not deactivated, the system will automatically restart after the Timer has finished its countdown.
1461/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd E.1 In tro d u c tio n The digital I/O is used for machine control and automation. E.2 DIO Co n n e c to r P in o u ts Located in the Connectors section of this document.
1481/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd F.1 Ha za rd o u s Ma te ria ls Dis c lo s u re Ta b le fo r IP B P ro d u c ts Ce rtifie d a s Ro HS Co m p lia n t Un d e r 2002/95/EC With o u t Me rc u ry The details provided in this appendix are to ensure that the product is compliant with the...
Page 163
2012/1/202012/1/20 IMBA-G412IS A ATX Mo th e rb o a rd P a rt Na m e To xic o r Ha za rd o u s S u b s ta n c e s a n d Ele m e n ts Le a d Me rc u ry Ca d m iu m...
Page 164
1501/20/2012164 IMBA-G412IS A ATX Mo th e rb o a rd 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签,此期限是估算这些物质”不会有泄漏或突变”的 年限。本 产品可能包含有较短的环境友好使用期限的可替换元件,像是电池或灯管,这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯 醚 (P b ) (Hg ) (Cd ) (CR(VI)) (P BB) (P BDE) 壳体...