Supported Sdi Input And Hdmi Output Formats - Matrox MicroQuad User Manual

Supported SDI input and HDMI output formats

The HDMI output format corresponds to the SDI input format. For example, if
the input format is 1920×1080p at 60 fps, the output format will also be
1920×1080p at 60 fps.
¡ Important If you are connecting more than one input source to Matrox
MicroQuad, the input sources must have the same video format.
Matrox MicroQuad supports the following SDI input and HDMI output video
formats:
• NTSC
• PAL
• 1280×720p at 50, 59.94, and 60 fps
• 1920×1080i at 50, 59.94, and 60 fps
• 1920×1080PsF at 23.98, 24, 25, 29.97, and 30 fps
• 1920×1080p at 23.98, 24, 25, 29.97, 30, 50, 59.94, and 60 fps
Remarks
• Make sure that your HDMI monitor supports the SDI input format that you
are using. Otherwise, your HDMI monitor will not display an output.
• When using PsF video input formats, DIP switch 6 must be in the ON
position (see
• Dual-link input is only supported on 3G Level B as a single SDI connector.
Two SDI connectors cannot be used to create a dual-link input.
• 4:4:4 video input signals are not supported.
"Setting the Matrox MicroQuad DIP switches"
Supported SDI input and HDMI output formats
21
on page 15).