Table of Contents
Advertisement
Using the Matrox MicroQuad Remote Control
Panel
Matrox MicroQuad has an optional Remote Control Panel for controlling the
Matrox MicroQuad unit remotely. To install the Matrox MicroQuad Remote
Control Panel, see
Matrox MicroQuad Remote Control Panel is accessed through the Mini USB
Type B port on the Matrox MicroQuad unit, and lets you control many functions
on the Matrox MicroQuad unit, such as to switch from quadrant view to full
screen view, select the audio channels for the VU meters and HDMI output, and
lock the audio to input channel 1 (SDI 1).
Instead of using the Matrox MicroQuad Remote Control Panel to perform certain
functions, you can use the Matrox MicroQuad buttons and the DIP switches on
the Matrox MicroQuad unit (see
page
14
and
¦ Note To indicate whether or not your video input sources are PsF, you must
use the DIP switches on the Matrox MicroQuad unit (see
MicroQuad DIP switches"
° To use the Matrox MicroQuad Remote Control Panel:
Make sure that power is supplied to the Matrox MicroQuad unit (see
1
"Powering Matrox MicroQuad"
output display device and at least one SDI input source connected to the
Matrox MicroQuad unit (see
page 8).
Connect a third-party USB cable from Matrox MicroQuad's USB port to
2
your computer's USB port.
¦ Note If your computer does not have a USB port, or if it has a different type
of USB port, you can use a compatible USB adapter/cable.
"Installing your Matrox MicroQuad software"
"Using the Matrox MicroQuad buttons"
"Setting the Matrox MicroQuad DIP switches"
on page 15).
Using the Matrox MicroQuad Remote Control Panel
on page 6), and that you have an HDMI
"Connecting input and output devices"
on page 2. The
on
on page 15).
"Setting the Matrox
on
17
Advertisement
Table of Contents
