Connecting Input And Output Devices - Matrox MicroQuad User Manual

8

Connecting input and output devices

The Matrox MicroQuad unit supports four SDI input sources via four BNC input
connectors and one HDMI output device via an HDMI output connector. For a
list of the supported input and output formats, see
HDMI output formats"
¡ Important If you are connecting more than one input source to Matrox
MicroQuad, the input sources must have the same video format.
Matrox MicroQuad
buttons (see
MicroQuad buttons"
²Caution Using a low-quality HDMI cable can damage the HDMI connector on
the Matrox MicroQuad unit.
Chapter 2, Connecting External Devices to Matrox MicroQuad
on page 21.
Matrox MicroQuad connections and buttons
"Using
the Matrox
on page 14)
To SDI input
sources
(see "Powering Matrox
MicroQuad"
Mini USB Type B port
(see "Using the Matrox
MicroQuad Remote Control
Panel" on page 17)
To SDI input
To HDMI
output device
"Supported SDI input and
Power
on page 6)
Matrox
MicroQuad
Infrared sensor (not used)
Matrox
MicroQuad
sources