Overview; Understanding The Matrox Microquad Status Leds; Matrox Microquad Input Channels - Matrox MicroQuad User Manual

10

Overview

Matrox MicroQuad is operated using the Matrox MicroQuad buttons located on
the unit (see
Matrox MicroQuad Remote Control Panel (see
Remote Control Panel"
LEDs (see
switches for performing various functions (see
DIP switches"
Understanding the Matrox MicroQuad status
LEDs
Matrox MicroQuad features the following status LEDs:
• SDI 1, SDI 2, SDI 3, and SDI 4
$
$
• Power The LED is green when power is supplied to Matrox MicroQuad
and the hardware is functioning properly.
¦ Note If the Matrox MicroQuad unit exceeds normal operating temperature, all
four SDI LEDs will flash red as a warning. For more information see
MicroQuad operating safety feature"

Matrox MicroQuad input channels

Matrox MicroQuad supports four input channels that correspond to the SDI input
connectors (SDI 1 to SDI 4). The SDI input connector number and the input
channel number correspond. For example, SDI input connector 1 (SDI 1)
corresponds to input channel 1 and SDI input connector 4 (SDI 4) corresponds to
input channel 4. If DIP switch 2 is OFF on the Matrox MicroQuad unit (see
"Setting the Matrox MicroQuad DIP switches"
labels
Panel is not selected (see
on page 17), the HDMI labels that appear on the HDMI output will correspond to
the input channel numbers. In the following examples, SDI input connector 1
(SDI 1) corresponds to CAM 1 (input channel 1) and SDI input connector 4
(SDI 4) corresponds to CAM 4 (input channel 4).
You can also show the VU meters for each input channel. For more information
on VU meters, see
Chapter 3, Using Your Matrox MicroQuad
"Using the Matrox MicroQuad buttons"
on page 17). Matrox MicroQuad also features status
"Understanding the Matrox MicroQuad status
on page 15").
Green The input source is connected.
Red The input source is not connected.
in the DIP Switch Settings of the Matrox MicroQuad Remote Control
"Using the Matrox MicroQuad Remote Control Panel"
"Monitoring audio levels"
on page 14) or using the
"Using the Matrox MicroQuad
LEDs"), and DIP
"Setting the Matrox MicroQuad
on page 6.
on page 15) or Hide HDMI
on page 13.
"Matrox