Table of Contents
Advertisement
Setting the Matrox MicroQuad DIP switches
Matrox MicroQuad features DIP switches on the side of the unit for locking the
Matrox MicroQuad buttons, hiding the HDMI labels, hiding the red selection
box, hiding the VU meters, locking the audio to input channel 1 (SDI 1), and for
indicating whether or not your video inputs are PsF. A DIP switch is ON when
the switch is down, and OFF when it is up.
Instead of using the DIP switches, you can set some of the DIP switch actions
using the Matrox MicroQuad Remote Control Panel (see
MicroQuad Remote Control Panel"
Matrox
MicroQuad
• DIP switch 1 When ON, the Matrox MicroQuad buttons are locked and
will not function.
• DIP switch 2 When ON, the HDMI labels are hidden. When OFF, the
HDMI labels are visible in order to identify the video input channel in
quadrant view (see figure
and full screen view (see figure
page 11).
• DIP switch 3 When ON, the red selection box is hidden. When OFF, the
red selection box is visible in quadrant view to indicate which video input
will be viewed in full screen view (see figure
view"
on page 11).
¦ Note If the red selection box is hidden, you can still select which video input
to view in full screen view.
on page 17).
Matrox MicroQuad DIP switches
OFF
"Matrox MicroQuad quadrant view"
"Matrox MicroQuad full screen view"
Setting the Matrox MicroQuad DIP switches
"Using the Matrox
ON
"Matrox MicroQuad quadrant
15
on page 11)
on
Advertisement
Table of Contents
