Product Feature Identification; Accessories - Tannoy CMS 801 DC BM Installation Manual

4. PRODUCT FEATURE IDENTIFICATION:

Conduit/Cable Clamp
Euro Type Connector
Mounting Wings
Fig 1.1: The blind-mount (BM) models come with a pre-fitted back-can
Screws for
mounting wings
Rotary Switch
Fig 1.2: A pre-install (PI) model shown without optional pre-install back-can
Conduit Knock-out points
Fig 1.3: Optional pre-install (PI) back-can for PI models
Note that the CMS801 DC PI model's transformer is pre-attached to the CMS801 DC back-can for easy install.
4
Tuning Port
Screws for
mounting wings
Rotary Switch
Tuning Port Euro Type Connector
Euro Type Plug
Euro Type Connector

5. ACCESSORIES:

Each product is supplied with the following accessories as standard:
C-Ring
Grille
Paint Mask
Optional accessories:
Plaster (Mud)
Ring
Tile bridge kit
Note: A tile bridge kit
must always be used
when installing into
suspended ceiling tiles
Cut-out template
60W Transformer
NOTE: for use with CMS801 DC PI
model in distributed lines without
back-cans.
5