Product Feature Identification; Safety Notices - Tannoy PCI Series Quick Start Manual

4
PMK IW and Back Can IW
Introduction
Thank you for purchasing this Accessory for Tannoy Dual Concentric In-Wall Loudspeakers for Installation Applications.
The Back Can IW is an optional accessory for the PCI 5DC IW, PCI 6DC IW, and QCI 6DC IW in-wall loudspeakers.
The PMK 6 IW is an optional pre-mount kit for the PCI 6DC IW, and QCI 6DC IW in-wall loudspeakers.
The PMK 5 IW is an optional pre-mount kit for the PCI 5DC IW in-wall loudspeaker.
The PMK kits can be used with or without the Back Can IW.
The Back Can IW can be used with or without the PMK kits.
Each accessory is available separately, and this quick start guide covers all.
Unpacking
Every Tannoy product is carefully inspected before shipment. After unpacking, please inspect your product to ensure no damage has occurred in transit. In the unlikely
event of damage, please notify your dealer and retain all shipping materials as your dealer may require return shipment.

Safety Notices

Tannoy will not be held responsible for any damages caused by the improper installation of these loudspeaker accessories.

Product Feature Identification

PMK Pre-Mount Kit
PMK 5 IW is used for the PCI 5DC IW
PMK 6 IW (shown below) is used for the PCI 6DC IW and QCI 6DC IW loudspeakers
Frame
Mounting Brackets
Back Can IW
for PCI 5DC IW, PCI 6DC IW, and QCI 6DC IW loudspeakers
Screw holes for
PMK kit option
Loop for strain
relief of cable
Acoustic Foam
Mounting Slots
(X10)
5
Quick Start Guide
Cable Entry