Clearance Requirements - Lincoln Electric power wave ac/dc 1000 sd Operator's Manual

A-3

CLEARANCE REQUIREMENTS

The maintenance requirements of the Power Wave
AC/DC 1000 SD demand that enough clearance
®
behind the machine be maintained. This is especially
important where more than one machine is to be used
or if the machines are going to be rack mounted.
The rear portion of the machine that contains the filter
and the cooling fans slides out for easy access to
clean the heat sink fins.
33.00
WIDTH NEEDED FOR FILTER
MAINTENANCE ACCESS
INSTALLATION
®
FIGURE A.1 - CLEARANCE REQUIREMENTS
FILTER REMOVAL
FROM SIDE OF MACHINE
22.63
POWER WAVE ® AC/DC 1000
Removing the four(4) clips and pulling back on the
rear portion of the machine will provide access for
cleaning the machine and checking the filter. The filter
is removed from the right side of the machine.
Where machines are mounted side by side, the
machine that is furthest to the right will need to have
the indicated clearance to the right side for filter
removal. See Figure A.1.
61.30
® SD
A-3