Specifications; Setup; Operation - Chicago Electric 62800 Owner's Manual & Safety Instructions

Specifications

Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETy INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the
following pages, refer to Parts List and Diagram on page 14.
Guide Bar Assembly
1. Assemble the Guide Bar (52) to the
bandsaw before operation.
2. Remove the Screws (51) on the Frame (27).
3. Install the Guide Bar around the blade as
shown using the Screws (51). See Figure A.
Page 8
Electrical Rating
No Load Speed
Blade Size
TO PREVENT SERIOUS INJURy FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet
before assembling or making any adjustments to the tool.
For technical questions, please call 1-888-866-5797.
120VAC / 60Hz / 10A
0-420 FPM
44-7/8" x 1/2" x .025" Thick
51
52
Figure A: Guide Bar
3150240
Item 62800