Searching For The Last Recorded Portion And Turning In The Recording Pause Mode (End Search Function) - Sony hdw-730 Operation Manual

• If you use a recorded tape, the timecode previously recorded may be
displayed, even though the new picture and audio are correctly
recorded.
3-2-8 Searching for the Last Recorded Portion
and Turning in the Recording Pause Mode
(End Search Function)
The End Search Function allows the camcorder to search for the end of
the recording on the tape after the recorded portion is rewound and
played back.
To use this function, set the END SEARCH function to ON on the
FUNCTION 1 page of the USER menu.
For detailed information on menu operation, see "4-6-2 Basic Use of the Menu"
on page 4-49.
Recorded portion
The current tape
position
Tape running direction
Searching for the end of the
recorded portion and turning
in recording pause mode
End Search function
Chapter 3 Recording and Playback
Blank portion
3
3-53