Sony hdw-730 Operation Manual page 140

3-6 Setting the Stand-by off
The VTR SAVE/STBY switch allows you to control the VTR power
mode during pauses in recording (rec-pause) or when stopped.
However, even in the standby mode (with the VTR SAVE/STBY switch
set to STBY), you can set the VTR in such a way that the mode is
3
automatically switched from the standby mode to save mode when the
tape does not run for a preset time, using the VTR MODE 4 page of the
MAINTENANCE menu.
1
Follow steps 1 to 4 in "Recording markers on the tape" on page 3-15
to display the VTR MODE 4 page of the MAINTENANCE menu.
2
Turn the MENU knob to move the t mark to STBY OFF TIMER,
then push the MENU knob.
The t mark at the left of STBY OFF TIMER changes to a z mark
and the z mark at the left of the setting changes to a ? mark.
3-66
Chapter 3 Recording and Playback
Timer During Rec-Pause