Sony hdw-730 Operation Manual page 98

5
Push the MENU knob.
The t mark at the left of LOOP/INTVAL REC changes to a z
mark and the z mark at the left of the setting changes to a ? mark.
3
6
Turn the MENU knob clockwise or counterclockwise until LOOP
appears.
If you turn the MENU knob clockwise or counterclockwise, the
setting changes in the following sequence: OFF y LOOP y
A. INT y M. INT.
When LOOP appears, the camcorder is in the Loop Rec mode where
picture, sound, and time code are constantly saved in memory. The
TALLY lamp (green) is on while the picture data is being stored in
the memory.
3-24
Chapter 3 Recording and Playback