Sony hdw-730 Operation Manual page 68

2-8 Warnings and Indications
Tape status, battery status, and level indicators
2
Audio channel level meter: When the CH-1/2 / CH-3/4 switch is
set to CH-1/2, the audio channel level 1 is displayed.
When the CH-1/2 / CH-3/4 switch is set to CH-3/4, the audio
channel level 3 is displayed.
Battery status indicator
Tape status indicator
2-42
Chapter 2 Locations and Functions of Parts and Controls
on the Display Panel
Nearly dead: "BATT" flashes.
Dead battery (battery must be charged):
"BATT" and "E" flash.
Close to end: "TAPE" flashes.
End (tape must be replaced):
"TAPE" and "E" flash.
Tape status, battery status, and level indicators
Audio channel level meter:
When the CH-1/2 / CH-3/4
switch is set to CH-1/2, the
audio channel level 2 is
displayed.
When the CH-1/2 / CH-3/4
switch is set to CH-3/4, the
audio channel level 4 is
displayed.
Fully charged
Full (at beginning)