Sony hdw-730 Operation Manual page 393

Page Items
BATTERY BEFORE
(Continued) END 3
END3
VTR MODE-1 VIDEO (F/R) EE/PB
OUT
(FF/REW)
AUDIO (F/R) CUE/EE
OUT
(FF/REW)
REC AUDIO EE/SAVE
OUT
CAMERA
ADAPTOR
Setting Contents
Used when a battery pack
11.0 to
other than a BP-M50/M100/
13.0V (in
0.1V L60A or an external power
steps) connected to the DC IN
connector is used. Sets the
voltage warning level just
before the battery ends.
10.5 to Used when a battery pack
11.5 V (in other than a BP-M50/M100/
0.1V L60A or an external power
steps) connected to the DC IN
connector is used. Sets the
voltage level at which the
battery ends and the
camcorder stops operation,
just before the battery ends.
Selects the video output
signal during FF/REW.
Selects the audio output
signal during FF/REW.
Selects the audio output
signal during recording.
ENABL/
Selects whether the camera
DSABL
adaptor is enabled to use or
not enabled.
ENABL: Camera adaptor can
be used.
DSABL: Camera adaptor
cannot be used.
A-37
Appendix
A