EQUIPMENT PACKAGING
Table 8: GXP2130/GXP2140/GXP2160/GXP2170/GXP2135 EQUIPMENT PACKAGING
Main Case
Handset
Phone Cord
Power Adaptor
Ethernet Cable
Phone Stand
Wall Mount
Quick Start Guide
CONNECTING YOUR PHONE
Table 9: GXP2130/GXP2140/GXP2160/GXP2170/GXP2135 CONNECTORS
Handset Port
Headset Port
USB Port
LAN Port
PC Port
EXT Port
Power Jack
To set up the GXP2130/GXP2140/GXP2160/GXP2170/GXP2135, follow the steps below:
1. Attach the phone stand or wall mount to the back of the phone where there are slots;
2. Connect the handset and main phone case with the phone cord;
3. Connect the LAN port of the phone to the RJ45 socket of a hub/switch or a router (LAN side of the
router) using the Ethernet cable;
4. Connect the 12V DC output plug to the power jack on the phone; plug the power adapter into an
electrical outlet. If PoE switch is used in step 3, this step could be skipped;
GXP2130/GXP2140/GXP2160/GXP2170/GXP2135 USER GUIDE
INSTALLATION
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
RJ9 handset connector port
RJ9 headset connector port (supporting EHS with Plantronics headset)
USB port connecting a USB flash drive. (not on GXP2130/GXP2135 )
10/100/1000Mbps RJ-45 port connecting to Ethernet
10/100/1000Mbps RJ-45 port connecting to PC
RJ11 connector port to connect the GXP2200EXT Board (only on
GXP2140/GXP2170)
12V DC Power connector port
1
1
1
1
1
1
1
1
Page 21 of 57