Gxp2200Ext Module; Table 10: Gxp2200Ext Packaging - Grandstream Networks GXP2130 User Manual

5. The LCD will display provisioning or firmware upgrade information. Before continuing, please wait for
the date/time display to show up;
6. Using the keypad configuration menu or phone's embedded web server (Web GUI) by entering the IP
address in web browser, you can further configure the phone.

GXP2200EXT MODULE

The GXP2140/GXP2170 is expandable with GXP2200EXT modules. GXP2140/GXP2170 supports up to 4
extension modules, adding 160 fully programmable phone extensions to the phone.
GXP2200EXT board package contains:
Note:
The GXP2200EXT board is an additional accessory for the GXP2140/GXP2170 and is not included in the
GXP2140/GXP2170 box.
To set up the GXP2200EXT board with the GXP2140/GXP2170, please follow the steps below:
1. On the back of the GXP2140/GXP2170 and the GXP2200EXT, there are slots for connector plate.
Attach the connector plate between the slots for GXP2140/GXP2170 and the GXP2200EXT;
2. Apply the screws provided and securely tighten them in (See
GXP2200EXT
with
3. Connect the GXP2200EXT board to the GXP2140/GXP2170 via EXT port using the RJ11-RJ11 cable
provided;
4. Install the phone stand on the GXP2140/GXP2170 and the GXP2200EXT board;
GXP2130/GXP2140/GXP2160/GXP2170/GXP2135 USER GUIDE

Table 10: GXP2200EXT PACKAGING

GXP2200EXT Main Case
GXP2200EXT Stand
RJ11-RJ11 Cable
Connector Plate
Screws
Quick Installation Guide
).
Yes (1)
Yes (1)
Yes (1)
Yes (1)
Yes (4)
Yes (1)
Figure 1: GXP2140/GXP2170 Back View
Page 22 of 57