Mute; Call Transfer - Grandstream Networks GXP2130 User Manual


Multiple calls. Automatically place active call on hold or switch between calls by pressing the LINE
key. Call waiting tone (stutter tone) will be audible on new incoming call during the active call.

MUTE

During an active call, press the MUTE button to mute/unmute the microphone. The LCD will show the Mute
icon on the top of screen, when the call is muted.

CALL TRANSFER

GXP2130/GXP2140/GXP2160/GXP2170/GXP2135 supports Blind Transfer, Attended Transfer and
Auto-Attended Transfer.

Blind Transfer.
 During the first active call, press TRANSFER and dial the number to transfer to;
 Press SEND key or # to complete transfer of active call.

Attended Transfer.
 During the first active call, press LINE key. The first call will be put on hold;
 Enter the number for the second call in the new line and establish the call;
 Press TRANSFER;
 Press the other LINE key which is on hold to transfer the call.

Auto-Attended Transfer.
 Set "Auto-Attended Transfer" to "Yes" under Web GUI->Settings->Call Features. And then click
"Save and Apply" on the bottom of the page;
 Establish one call first;
 During the call, press TRANSFER. A new line will be brought up and the first call will be
automatically placed on hold;
 Dial the number and press SEND or # to make a second call. (Once the number is entered, a
"Transfer" soft key will show. If "Transfer" soft key is pressed instead of SEND or #, a blind transfer
will be performed);
GXP2130/GXP2140/GXP2160/GXP2170/GXP2135 USER GUIDE Page 41 of 57