Neato Robotics Botvac User Manual page 17

TM
CLEANING THE DROP SENSORS
Using a cotton swab, periodically clean the drop sensor windows
(2) on the bottom of your Botvac (see below).
Drop
sensor
window
CLEANING THE TOP OF YOUR BOTVAC
Clean the top of your Botvac periodically with a damp cloth.
Make sure there is no dirt accumulated under the Laser Cover.
If there is any dirt or debris, remove it so the laser can navigate
your home accurately.
™
Neato Botvac User Manual
Drop
sensor
window
Laser Cover
Robot Top
30
WHERE TO BUY NEATO BOTVAC™ GENUINE ACCESSORIES
Go to www.neatorobotics.com and click on Where to Buy to find
replacement accessories and parts for your Botvac.
Combo
Length = 10.875 in / 276 mm
Brush
Best brush for picking up pet
hair. Much quieter on hard
floors.
Blade Brush
Length = 10.875 in / 276 mm
Superior cleaning
performance for all floor
types.
Side Brush For precise edge cleaning.
Standard Surface area = 13.1 in
Filter
High- Surface area = 84.7 in
Performance
Captures particles down to
Filter
0.3 microns - more than three
times the amount of fine dust
particles as a standard filter.
Dirt Bin Size: 0.7 liters
Bigger-is-better dirt bin holds
more and is easy to empty.
Boundary Magnetic strips keep your
Markers Botvac where you want it
to go.
Battery Rechargeable NiMH 12V
3600 mAh battery.
Charge Base Extra charge base is great for
homes with stairs.
/ 85 cm
2 2
2 / 547 cm 2
™
31 Neato Botvac User Manual
TM