Digittrade HS256S User Manual page 97

Connect the HS256S to the PC
disconnect the HS256S from the PC
Connector
Insert the smart card into the slot
Insert smart card A into the slot
Insert smart card B into the slot
Pull out the smart card
The smart card is locked and unusable
Enter the smart card PIN by using the
touchpad
Enter the new smart card PIN on the
touchpad
Enter the device PIN on the touchpad
Enter the new device PIN on the touch-
pad
Misentry of the smart card PIN
Press "CHANGE PIN" then "0"
Press "CHANGE PIN" then "1"
Press "ADMIN" then "0"
(similiar for 1,2,3)
Press "ENTER"
Press "ESC"
The "STATUS" LED flashes/
illuminates green
The "STATUS" LED flashes
green X-times
(X = number of flashes)
The "STATUS" LED flashes
multiple times
The "STATUS" illuminates
green
The "STATUS" LED flashes/
illuminates red
The "ERROR" LED flashes/
illuminates red
The "STATUS" or "ERROR"
LED flashes red X-times
(X = number of flashes)
The "STATUS" or "ERROR"
LED illuminates red
The "STATUS" or "ERROR"
LED flashes orange X-times
The "STATUS" LED flashes
orange X-times
(X = number of flashes)
You will hear beep tones
X-times
(X= number of beeptones)
The cryptographic key will be
written to the smart card
The cryptographic key will be
destroyed
Do this step 8 times in a row
97