Digittrade HS256S User Manual page 89

Problem
The drive cannot be
identified
The drive is perfor-
maing very slowly
Symptom
the wrong USB-cable is
used
connection using USB
the wrong USB-cable is
used
wrong connection to the
computer
the HS256S is plugged
in an USB hub
other USB devices are
connected to the same
port
Solution
Please use the delivered
USB-Y-cable and connect
the A- and B-plug to
your computer.
Please ensure your
HS256S is connected to
a USB 2.0 bus
interface.
Please use the delivered
USB-Y-cable and connect
the A- and B-plug to
your computer.
Ensure the USB and
FireWire cable is con-
nected to your computer.
Connect the HS256S di-
rectly to your computer.
Disconnect any other
USB devices and see if
performance improves.
89