Antari IP-1500 User Manual
Hide thumbs Also See for IP-1500:

Advertisement

Quick Links

IP-1500
Waterproof Fog Machine
User Manual
IP-63
English
© 2016 Antari Lighting and Effects Ltd.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IP-1500 and is the answer not in the manual?

Questions and answers

Summary of Contents for Antari IP-1500

  • Page 1 IP-1500 Waterproof Fog Machine User Manual IP-63 English © 2016 Antari Lighting and Effects Ltd.
  • Page 3: Danger Of Electric Shock

    This machine is spray-waterproof only. Immersing it in water can damage it. Danger of Electric Shock The IP-1500 is designed for both outdoor and indoor applications. Prior to use, please ․ verify that an earth leakage circuit breaker (ELCB) is installed.
  • Page 4: Danger Of Burns

    Before beginning your initial setup on your fog machine, make sure that there is no evident damage caused by transportation. In the event that the unit's housing or cable is damaged, do not plug it in and do not attempt to use it until after contacting your Antari dealer for assistance.
  • Page 5 The display will indicate “Antari IP-1500” followed by “Wireless Setup”. During the next 15 seconds, the machine is in wireless setup mode for registering wireless controllers. It is possible to...
  • Page 6: Operation

    a single controller for parallel control of an unlimited number of machines. Just power on the machines simultaneously and register the controller. If there is no wireless controller registered in wireless setup mode, the machine will keep the record of the previous operation.
  • Page 7 control panel. Menu settings with the button FUNCTION Setting time intervals for timer operation FUNCTION until the display indicates “Interval Set“. Use the Press the button buttons UP and DOWN to adjust the intervals between the individual fog outputs in timer mode within the range of 1 and 200 seconds. Setting the output duration for timer operation FUNCTION until the display indicates “Duration Set“.
  • Page 8 FUNCTION until the display indicates “DMX Address“. Use the Press the button buttons UP and DOWN to adjust the DMX512 start address. Please refer to chapter DMX512 settings for more information on DMX operation. Switching the wireless function on and off FUNCTION until the display indicates “Wireless On“.
  • Page 9: Wireless Controller

    The unit counts down to 0 seconds and emits fog. To deactivate the timer mode, press the button TIMER again. Hibernate Mode FUNCTION until the display indicates “Hibernate Mode”. Press the button DOWN to turn it “ON” or “OFF”. Hibernate Use the button UP and mode is a power saving feature that will automatically shut down when DMX signal...
  • Page 10: Dmx512 Settings

    Data+ DMX512 Settings The IP-1500 is equipped with a DMX512 system. For connecting a DMX controller, 5-pin male-female XLR connections are provided at the back of the machine. The machine uses one control channel for adjusting the output volume. The channel has a DMX value range of 0 to 255.
  • Page 11: Technical Specifications

    When reconnecting the power cord, please make sure there are no foreign objects nor water at the bottom that could prevent proper ventilation. Please use Antari FLG or FLR water-based fog liquid in order to ensure a satisfactory performance with thin fog. Technical Specifications...
  • Page 12 C08IP1504...

Table of Contents