Spare Parts And Accessories; Warranty - Miller 1036 Operator's Manual

Storage
The Compass 20 Fluid Head can be stored for extended periods;
Miller recommends storage in a Miller Soft Case and the
following:
• Remove battery.
• Clean the external surfaces.
• Keep in a dry place away from direct sunlight.
• Loosen off PAN & TILT LOCK.

Spare Parts and Accessories

ITEM
Battery
Camera plate Assembly (Including 1/4" + Pin Carriage)
Camera screw 3/8"
Camera screw 1/4"
1/4" + pin carriage
Standard Pan Handle assembly (incl. Handle Clamp)
Standard Pan Handle
Soft Case
Clamp nut

Warranty

Please refer to warranty card for complete details.
Service, Sales and Support
Miller Authorised Service Agents must carry out all service and
repair work. Failure to observe this requirement may void warranty.
It is advisable to notify Miller or a Miller Authorised Service Agent
if a change of performance is observed as a result of dropping or
rough usage. For information regarding sales and service of Miller
products or for your nearest Miller representative please contact
us via our website or at the following:
MILLER CAMERA SUPPORT EQUIPMENT
30 Hotham Parade, Artarmon, Sydney, NSW 2064 Australia
Tel: +61 2 9439 6377
Email: sales@miller.com.au
ITEM NO.
MILLER CAMERA SUPPORT (LLC) USA
P7715
218 Little Falls Road, Cedar Grove, New Jersey 07009-1231 USA
#1208
Tel: (973) 857 8300
P0037
Email: sales@millertripods.us
P0036
MILLER FLUID HEADS (EUROPE) LTD.
#493
Unit A2, Ford Lane Industrial Estate
# 680
Ford Lane, Ford, West Sussex BN18 0DF, United Kingdom
# 689
Tel: +44 (0)1243 555255
Email: sales@millertripods-europe.com
# 876
P7850
Website - www.millertripods.com
10
Fax: +61 2 9438 2819
Fax: (973) 857 8188
Fax: +44 (0)1243 555 001