Related Manuals for Miller TRIPOD SERIES
Summary of Contents for Miller TRIPOD SERIES
- Page 1 819 Solo VJ 16/1/04 11:25 AM Page 1 SOLO VJ 100mm TRIPOD SERIES Operator’s Manual #1505 Solo VJ 3-Stage Tripod...
-
Page 3: Technical Data
819 Solo VJ 16/1/04 11:25 AM Page 3 Introduction Thank you for purchasing the Miller SOLO VJ tripod. SOLO VJ is a professional tripod, compatible with most 100mm ball levelling pan & tilt heads. SOLO VJ is designed to support camcorders in location and studio production environments. - Page 4 Remove tripod from carry bag, undo clip on leg strap and stand on a level surface (if possible). Depending on surface, screw out rubber foot for non-scratch contact to interior or hard surfaces or in for a spike on exterior soft surfaces such as dirt or sand.
- Page 5 819 Solo VJ 16/1/04 11:25 AM Page 5 Tripod Setup (cont) Mid Position: Fig 5 Leg angle adjuster Note: This refers to the Mid leg angle position, not necessarily the height of the tripod. The SOLO VJ tripod has three leg angle positions.
-
Page 6: Shoulder Strap
Shoulder Strap SOLO VJ’s Shoulder Carry Strap can be used looped (both ends attached to the mounting point on the bowl), to carry the tripod on one shoulder. it can be used attached to the bowl and the Leg Strap “D” ring, to carry the tripod across your back with fluid head towards the ground.
Need help?
Do you have a question about the TRIPOD SERIES and is the answer not in the manual?
Questions and answers