User Login - 4IPNET HSG200 Quick Start Manual

< User Login >
To verify whether the configuration of the new on-demand user account(s) created via the
Setup Wizard has been completed successfully:
1. Connect a client device (e.g. laptop, PC) with wireless interface to scan the configured
ESSID of HSG200 (e.g. "HSG200-2") and get associated with this ESSID.
2. The client device will obtain an IP address automatically via DHCP from HSG200.
Open a web browser on a client device, access any URL, and then the default User
Login Page will appear.
3. Enter the Username and Password of an on-demand account previously generated
via Setup Wizard (e.g. "testuser@ondemand" as the Username and "testuser" as
the Password); then Click Submit.
Note:
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
The postfix can be omitted only when the default authentication option
is used. For example, "ONDEMAND" is the default authentication
option at this system; therefore, you may enter either "testuser" or
"testuser@ondemand" in the Username field.
HSG200 802.11n/b/g Hotspot Gateway ENGLISH
14
Quick Installation Guide