User Login - 4IPNET HSG1250 Quick Installation Manual

< User Login >
To verify whether the configuration of the new local
user account(s) created via the Setup Wizard has
been completed successfully:
1. Connect a client device (e.g. laptop, PC) to any
LAN Port of HSG1250. The device will obtain an
IP address automatically via DHCP.
2. Open a web browser on a client device, access
any URL, and then the default User Login Page
will appear.
3. Enter the Username and Password of a local
user account previously generated via Setup
Wizard (e.g. "testuser@local" as the Username
and "testuser" as the Password); then Click
Login.
Note:
1. HSG1250 supports multiple authentication
options including built-in local user database
and external authentication database (e.g.
RADIUS). The system will automatically
identify which authentication option is used
from the full username entered.
2. The format of a full (valid) username is
userid@postfix, where "userid" is the user
ID and "postfix" is the name of the selected
authentication option.
3. Exception: The postfix can be omitted only
when the default authentication option is
used. For example, "LOCAL" is the default
authentication option at this system;
therefore, you may enter either "
testuser
" @local" in the Username field.
Congratulations!
The Login Success Page will appear after a client
has successfully logged into HSG1250 and has been
authenticated by the system.
The appearance of Login Success Page means that
HSG1250 has been installed and configured
properly.
< Service Zone >
4ipnet HSG1250 has introduced an important new
concept called "Service Zone". For how to set up
Service Zones, please refer to the User's Manual.
For further configuration and information,
please refer to the User's Manual.
testuser
" or
⑩
HSG1250 HSG1250 Wireless Hotspot Gateway
HSG1250 HSG1250
Quick Installation Guide Quick Installation Guide
Quick Installation Guide Quick Installation Guide
ENGLISH
P/N: V10320111123