Deployment Example - 4IPNET HSG200 Quick Start Manual

Deployment Example

< Small Hotspot Network Environment >
Nowadays, wireless network service is common and popular in a hotspot network
environment. HSG200 provides wireless network service with authentication required for
clients in Public Zone. Wireless clients in the Public Zone and Private Zone are isolated
from other wireless clients within the same zone when Station Isolation feature is
enabled. Using wireless instead of wired service helps hotspot owners to build network
service quickly.
HSG200 supports two zones, Private and Public. In the Private Zone, authentication is
not required to access the network via wired and wireless. Administrator can access the
Web Management Interface (WMI) of HSG200 through the wired LAN port. Waiters or
waitresses can send orders back to the electrical menu system via wireless hand set
devices. In Public Zone, by default, Authentication Required is enabled, so wired and
wireless clients in Public Zone are required to get authenticated successfully before
surfing the Internet.
Configuration Steps:
Step 1: Configure Wireless Band for the Wireless interface
Click Main Menu in the homepage. Click the System menu, then Zone
Configuration tab.
Select a desired wireless band from Band drop-down list.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
The switches deployed under HSG200 must be Layer 2 switches only.
HSG200 802.11n/b/g Hotspot Gateway ENGLISH
16
Quick Installation Guide