4IPNET HSG200 Quick Start Manual page 7

Top LED Panel
1
2
3
4
5
6
7
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
LED ON indicates power on; OFF indicates power off.
LED ON indicates WAN connection; OFF indicates no connection;
BLINKING indicates transmitting data.
LED ON indicates LAN1/LAN2 connection; OFF indicates no
connection; BLINKING indicates transmitting data.
LED ON indicates wireless ready.
LED ON indicates outbound internet connection is alive; LED OFF
indicates that outbound internet connection is down. The detection
interval is 1 minute; hence it reflects the connection status within the
last minute.
For indicating WES status during WES setup:
WES Start
WES Negotiate
WES Fail (Negotiate
Timeout)
WES Success
For future usage only.
HSG200 802.11n/b/g Hotspot Gateway ENGLISH
Master
LED BLINKING SLOWLY
LED BLINKING SLOWLY
LED OFF
LED ON for over 5
seconds
3
Quick Installation Guide
Slave
LED BLINKING
QUICKLY
LED BLINKING
QUICKLY
LED OFF
LED ON for over 5
seconds (after Master
displays WES Success)