Through The Wall - Quadra-Fire CASTILE-MBK-B Owner's Manual

R
B. Through The Wall
Horizontal termination cap must be a minimum of 6 inches.
(152mm) from the wall. Approved for mobile home instal-
lations. Must use  or 4 inch (76-102mm) "L" or "PL" listed
pellet venting or listed double wall pipe and a Quadra-Fire
Outside Air Kit in mobile homes.
NOTICE:
Please note that while the minimum clearance for the termination cap is 6 inches (152mm)
there is the possibly of soot buildup around the termination area. If this occurs we sug-
gest to move the termination further away from the house to prevent it.
Page 14
Straight Out
6 in.
(152mm)
Minimum
From Glass
Figure 14.1
45 Degree
Illustration shows venting going in both directions.
Choose which one is best for your installation.
Wall
Thimble
6 in.
(152mm)
Minimum
2 in.
(51mm)
Minimum
Figure 14.2
NOTE:
In Canada, where passage through a wall or partition of
combustible construction is desired, the installation shall
conform to CAN/CSA-B65
2 in.
(51mm)
Minimum
Wall
Horizontal
Thimble
Termination
Cap
6 in.
(152mm)
Minimum
Non-combustible Hearth Pad
6 in. (152mm)
Minimum
2 in. (51mm)
Minimum
7021-130
Castile-B FS Pellet Stove
September 24, 2009