Delay Start; At The End Of A Programme - Miele WT 945 S WPS Operating Instructions Manual

DRYING

Delay start

I Select Delay start
^ Press the Delay start button
repeatedly until the required delay
start period shows up in the display
(from i to 9 hours).
Press the"START" button. The chosen
time will start to count down hour by
hour. The programme will then start
automatically.
To cancel "Delay start":
^ Press the Delay start button once
when is showing in the display, or
^ Switch the appliance off using the
I-ON/0-OFF button.
Memory function
If an additional option(s) is selected
for a programme, and / or the spin
speed is altered, the machine stores
these changes in memory at the start
of a programme.
When that particular programme is
chosen again, the display will show the
additional option(s) and / or spin speed
which have been stored for that
programme in the memory.
34
Exception: Delay start
J Start the programme
The START indicator lamp will flash as
soon as a programme can be started.
^ Press the START button.
After the programme has started the
START indicator lamp will light up
constantly.
The door cannot be opened if the
temperature is higher than 70°C. If
this is the case the locked indicator
light will flash when the Door button
is pressed.
Exception: when the programmable
function "Opening the door at high
temperatures" has been activated.

At the end of a programme

When the drying programme has
finished the buzzer will sound (see
"Programmable functions") and the
Anti-crease / finish sequence indicator
lamp will come on.
^ Remove the laundry.
If you want to dry a further load:
^ First switch the machine off and then
on again with the I-ON/0-OFF button.
^ Proceed as described before in this
section.
After drying
For further information on drying see
section "After each washing or drying
programme".