The Wash Programme Stops And A Fault Indicator Light Comes On - Miele WT 945 S WPS Operating Instructions Manual

The wash programme stops and a fault indicator light comes
on.
Problem
The Water inlet/drain
indicator lamp is
flashing and the load in
the machine has not
been washed.
The Water inlet/drain
indicator lamp is
flashing.
The Final spin indicator
lamp is flashing in the
programme sequence
display.
Possible cause
The water inlet system
is blocked.
There is a blockage in
the water outlet.
The Waterproof system
has reacted.
The final spin has not
taken place. The
machine detected an
imbalance.
Problem solving guide
Remedy
– Turn the programme
selectors to Finish .
– Open the stopcock.
– Select and start the
programme again.
– Clean the fluff filter and
the drain pump.
– Has the drain hose been
fitted too high? Maximum
delivery head 1.00 m.
– Call the Miele Service
department.
– Loosen the laundry.
– Turn the WASHING
programme selector to
Spin .
– Make sure you select an
appropriate spin speed
for the type of load.
45