Table of Contents
Advertisement
Before using the machine for the first
time ensure that it is correctly
installed and connected. See the
relevant section under "Installation".
Flushing out the drum
^ Turn on the stopcock.
^ Turn both programme selectors to the
Finish position.
^ Switch the machine on with the I-ON /
0-OFF button.
Do not load any laundry.
^ Add max. 1/4 of the amount of
detergent recommended for a full
load into Compartment j of the
detergent dispenser.
^ Turn the WASHING programme
selector to the "COTTONS 60°C"
position.
Important! This programme is required
to prepare the machine for operation.
^ Press the Water plus button.
^ Press the "Spin" button repeatedly
until the Without final spin indicator
lamp comes on.
^ Press the START button.
This will flush out any residues in the
machine by the end of the programme.
Water hardness reminder
The amount of detergent required will
depend on various factors, including
water hardness. The dial in the
detergent dispenser can be set as a
water hardness reminder.
Before using for the first time
There is a yellow lever behind the
detergent drawer facia panel.
^ Remove the lever.
^ Use it to turn the dial to the position
which represents your water
hardness level.
Your local water authority can advise on
water hardness in your area.
13
Hide quick links:
Advertisement
Table of Contents
