Local Management; Remote Management - TP-Link Arher C3200 User Manual

3. Enter the old username and old password. Enter the new username and enter the new password twice (both case-
sensitive). Click Save.
Use the new username and password for the following logins.
12. 6.

Local Management

You can control the local devices' authority to manage the router via Local Management feature. By default all local connected
devices are allowed to manage the router. You can also allow only one device to manage the router.
Follow the steps below to specify the local management.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > System
3. Keep the Port as the default setting. Enter the IP address or MAC address of the local device to manage the router.
Note:
1 ) The IP address of the local device must be in the same subnet as the router's LAN IP address.
2 ) If you want that all local devices can manage the router, just leave the
4. Click Save to make the settings effective. Now only the device using the IP address or MAC address you set can manage
the router.
12. 7.

Remote Management

By default, the remote devices are not allowed to manage the router from the Internet.
Follow the steps below to allow remote devices to manage the router.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Advanced > System
Chapter 12 Manage the Router
Tools> Administration page. Locate the
Tools> Administration page. Locate the
Local Management section.
IP/MAC Address
Remote Management section.
field blank.
60