Customize Your Settings - TP-Link Arher C3200 User Manual

Insert your USB storage device into the router's USB port directly or using a USB cable. Wait several seconds until the USB
LED becomes solid on.
Tips:
• If you use USB hubs, make sure no more than four devices are connected to the router.
• If the USB storage device requires using bundled external power, make sure the external power has been connected.
• If you use a USB hard drive, make sure its file system is FAT32 or NTFS.
• Before you physically disconnect a USB device from the router, safely remove it to avoid data damage: Go to
Settings > Device Settings
2.
Play the Media on Your USB Disk
Now the DLNA-supported devices (such as your computer and pad) connected to the router can detect and play the
media files on the USB disks.
1.
2.
Windows
computer
• Use a third-party DLNA-supported player.
pad

7 3 2 Customize Your Settings

To Only Share Specific Content
By default, Share All is enabled so all content on the USB disk is shared. If you want to only share specific folders, follow the
steps below:
1. Visit http://tplinkwifi.net, then log in with the username and password you set for the router.
2. Go to Advanced > USB Settings
3. Focus on the section of
4. Select the Volume Name
5. Select Enable Media Sharing
Chapter 7 USB Application
and click Safety
Open the Windows Media Player.
Click the media server name (such as
you can directly view photos, play music and watch movies that you share on the USB disks.
> Sharing Access.
Folder Sharing. Click the button to disable
and Folder Path, then enter a
and click OK.
Remove.
Genie Media
Share
Folder Name as you like.
Severs) under the list of
All, then click Add to add a new sharing folder.
Advanced > USB
Other Libraries, then
30