TP-Link Arher C3200 User Manual page 57

Chapter 11 Customize Your Network Settings
3 ) In the IPSec Connection Name
4 ) In the Remote IPSec Gateway (URL)
5 ) To configure Site A's
In the Tunnel access from local IP addresses
example. Then input the LAN IP range of Site A in the
Subnet Mask of Site A.
6 ) To configure Site B's
In the Tunnel access from remote IP addresses
example. Then input the LAN IP range of Site B in the
Subnet Mask of Site B.
7 ) Select the Key Exchange Method
8 ) Enter the Pre-Shared Key
Note:
• The key should consist of visible characters without blank space.
• Make sure Site A and Site B use the same key.
column, specify a name.
column, Enter Site B's WAN IP address.
LAN:
LAN:
for the policy. We select
for IKE authentication. Then keep
column, here we take Subnet Address
IP Address for VPN
column, here we take Subnet Address
IP Address for VPN
Auto(IKE) here.
Perfect Forward Secrecy
as an
column, and input
as an
column, and input
enabled.
54