Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Silvertel EVALAg7100
Summary of Contents for Silvertel EVALAg7100
- Page 1 Silvertel Ag7100-Ag6100 Evaluation Board User Manual Rev 1.0 – July 2015...
-
Page 2: Table Of Contents
Ag7100-Ag6100 Evaluation Board User Manual 1 Table of Contents Table of Contents Table of Figures Introduction Board Description Modules ....................... 2 Configuration Options ..................2 4.2.1 Ag6100 & Ag7100 (Full Configuration) ... -
Page 3: Introduction
Introduction This manual is intended to be a guide to using the “Ag7100 – Ag6100 evaluation board”. 4 Board Description 4.1 Modules This evaluation board will work with the following Silvertel modules: - Ag7100 Ag6100 4.2 Configuration Options This board can be configured to work with either one or both of the modules shown in Section 4.1. -
Page 4: Ag6100 & Ag7100 (Full Configuration)
Ag7100-Ag6100 Evaluation Board User Manual 4.2.1 Ag6100 & Ag7100 (Full Configuration) This board can be fully configured with both Ag6100 (U2) and Ag7100 (U1) modules. In this configuration, the board is powered from a 12V to 27V dc supply. Connected to J3 (positive) &... -
Page 5: Ag6100 (Only)
Ag7100-Ag6100 Evaluation Board User Manual 4.2.2 Ag6100 (Only) If you already have a 48V to 57V dc supply and you just want to use the Ag6100. U1 can be removed and the board powered by connecting this supply to J6* (centre pin is Positive), see Figure 3. -
Page 6: Ag7100 (Only)
Ag7100-Ag6100 Evaluation Board User Manual 4.2.3 Ag7100 (Only) Alternatively if you just require a boost converter; then U2 can be removed. A 12V to 27V dc supply can be connected to J3 – J5 (or J4) and the Ag7100 output can be extracted from J6 (again centre pin is positive), see Figure 4. -
Page 7: Ag6100 Output Power
Ag7100-Ag6100 Evaluation Board User Manual 4.3 Ag6100 Output Power The output power from the Ag6100 can be connected to the centre taps of T1 using the links – LK1 & LK2, see Figure 6. With the links in position “a”, the Ag6100 output is connected to centre taps of the pairs 4 &...
Need help?
Do you have a question about the EVALAg7100 and is the answer not in the manual?
Questions and answers