Advertisement
Available languages
Available languages
Precautions for Use
CAUTION! Use of this device by persons with any electrical implant such
as a heart pacemaker, or by pregnant women, is not recommended.
1. Set scale on floor. Surface must be level for accurate operation and safety.
Weight Measurement Only
To measure weight only:
• Place the scale on a hard, level and flat surface
• Quickly and firmly tap center of scale platform with foot to activate digital display.
• Wait until the screen displays "0.0LB"
• The scale is ready to be used
• Step onto the scale
• A graph will wind up in the spiral while weight is taken.
• Your weight will be displayed on the screen and will remain displayed for a few
seconds
• The scale goes out automatically.
Personal Data Setting Mode
You can program the Ultra-Slim Body Analysis Scale very easily and very quickly. All
you need to do is enter your gender, your height and your age
into the unit's memory and that's it! For every future use, the scale will automatically
recall these data to calculate your body mass index, your body fat and your
hydration rate.
Note: This unit records data for 4 users.
Caution: Every time you reprogram the user memory (no. 1, no. 2, no. 3 or no. 4), you
replace the previously saved data.
• When the scale is off, press the button that corresponds to the number of the user
you wish to program and hold for a few seconds. User 1 presses button '1', user
2 presses button '2', user 3 presses button '3' and user 4 presses button '4'. You
will hear a 'beep' which indicates that you are in 'Programming' mode.
• The number corresponding to your user number will appear on the screen.
• The gender icon appears, press the 'up' or 'down' ('2' or '3') buttons to select
then press 'Set' ('1') to confirm your selection. An audible 'beep' will confirm your
selection.
• The height icon (feet/inch:&")flashes and default value of 5:3" appears on the LCD,
press on the 'up' or 'down' ('2' or '3') buttons to select then press 'Set' ('1') to
confirm your selection. An audible 'beep' will confirm
your selection.
• The age icon (AGE) flashes and default value of 30 appears on the LCD, press on
the 'up' or 'down' ('2' or '3') buttons to select then press 'Set' ('1') to confirm your
selection. An audible 'beep' will confirm your selection.
• The scale shows your user number and gender and displays '0.0 LB'. It is ready to
use.
Note: The scale turns itself off automatically after a few seconds of non-use.
You have finished entering your personal data.
Before Using Scale
Advertisement
