Sony PDW-D1 Operation Manual page 130

2) This is supported from firmware version 1.5
and utility software version 1.50.
File name setting operations
To use clips and clip lists with user-
defined names over FAM
connection: Select "free" in the
Naming Form section, and click the
Set button.
Able to use clips with user-defined
names over FAM connection
Able to use clip lists with user-defined
names over FAM connection
To assign clip names on this unit: Set a
title in the Clip Title Setting section
beforehand (see "Clip title setting
operations" (page 129)), and set the
following items, and then click the Set
button.
• Set in the Clip Title Setting section:
Enable
• Naming Form: free
• Auto Naming: title
130 5-3 Details of Functions
Fuji.MXF
Sakura.SMI
TITLE00001.MXF
TITLE00001
Under the above settings, the titles
assigned to clips are used as their
clip names (file names).
C0001.MXF
TITLE00001
Under other settings, clips have
standard-format clip names (file names).
Note
When the first letter of the title setting with
the Clip Title Setting section is a space or
period (.), the clip name is the title string
minus the first letter.
Battery mode settings
Set the following items relating to the
battery pack loaded in this unit.
In the Settings/display contents column of
the table, underlined values indicate the
factory default settings.
Item name Settings/display
contents
SETUP Set the voltage
BATTERY END warning level just
before the battery
ends and the voltage
level at which the
Sub-item
battery ends.