Exiting - Sony PDW-D1 Operation Manual

Select the serial number
that you want to operate from the list box,
and then click the OK button. (Only one
PDW-D1 can be operated by this software
at any one time.)
The software quits without starting if you
click the Cancel button.
1) You can connect two PDW-D1 units for
purposes such as copying material between the
units. For more information, refer to the
online help of the PDZ-1 Proxy Browsing
Software.
2) The serial number can be found on the name
plate, which is located on the base panel of the
PDW-D1 main unit.
On a Macintosh computer
Open the folder in which the utility
software is installed, and then double click
PC Utility.
This displays the home window of the
utility software.
Notes
• English is selected as the factory default
setting for the language used. You can
change this as required (Windows only,
see page 122).
• A message like the one shown below
appears if initialization fails, preventing
the software from starting. Check to be
sure that this unit is correctly connected
to the computer, and then repeat the
previous operation.
120 5-1 Starting and Exiting
2)
of the PDW-D1

5-1-2 Exiting

On a Windows computer
Click the × (close) button in the top right
corner of the window.
On a Macintosh computer
Click the × (close) button in the top left
corner of the window.